Welcome to the High Vultage Racing

A small club with a laid back atmosphere, Mostly composed of my real life friends I got hooked on VRC and the friends I've met along the way. Most of us are new to VRC and also new to on-road rc racing. Here is a place we can compete with each other and not the 3-4 hundred world class drivers out there, lol.

Club details

Club name: High Vultage Racing
Created: 03.12.2012
Manager: Josh Vulte
Country: US USA
Home track: RC Excitement 2
Members: 65
joinbutton

Tips & knowledge item

MHS 1 Setup 4wd SC mod added: 02.04.2020

Category: Car setup     Views: 4301     Rating:  
Associated with track: MHS Raceway 1
 


Good day all, this here is a setup I use at the moment for Mikes hobby shop 1.

It is not the best out there but

I was able to do consistent high 16 second laps with this setup.

Hopefully this can help someone out for the finals.

good luck :)




Edited by author: 2.4.2020 1:53:04 GMT

Edited by author: 2.4.2020 22:52:25 GMT

Edited by author: 6.4.2020 5:16:47 GMT

Comments  

Only active members can post comments
(Total posts: 6)
27.04.2020 [10:48]
Posted by: Lee General (US) on 20.4.2020 5:40:23 (UTC) yessir i found the motor and such thank you very much,btw im really new...what about the hole shot sniper tires? seems like im stuck with the stock tires,is that an upgrade? btw ya setup is good im running top 10 in a couple sct events


the tires that I am using should also be part of the all inclusive package.
You should be able to change it from the tire compound section.
All though I do not believe that the tires makes much of a difference.
20.04.2020 [06:40]
yessir i found the motor and such thank you very much,btw im really new...what about the hole shot sniper tires? seems like im stuck with the stock tires,is that an upgrade? btw ya setup is good im running top 10 in a couple sct events
20.04.2020 [02:07]
@lee.

Hi Lee. For modified I use the Tekin 4600 kv motor.

It should be available with the all inclusive membership.
19.04.2020 [22:04]
how do you get a 4600?
03.04.2020 [09:03]
Hello Zak, I am running the tekin 4600 kv motor.
03.04.2020 [08:23]
I can give this a try tomorrow and see if I bring my laptimes down. Were you running 7.5 or 8.5??

About the author

photo
Eben C
ZA South Africa
Member since 06.08.2012
Show profile
Best class:
Skill rating:
1:8 Electric buggy Spec
9.89 (Sport)

Most popular tips

DXTweak2 Calibration Tool / Application

Forum: Software
US Edward S
Added: 17.04.2013 [14:11]
Posts: 6     Views: 23451     Rating:

Beginners - Hurry up and slow down... slow right down!

Forum: Training
GB Mike K.
Added: 05.01.2014 [13:38]
Posts: 16     Views: 19607     Rating:

1/8 buggy for normal direction - Buenos Aires

Forum: Car setup
GB Javan C
Added: 04.03.2014 [11:59]
Posts: 4     Views: 11210     Rating:

VSYNC Off = 60+FPS

Forum: Software
US Edward S
Added: 22.04.2013 [16:44]
Posts: 11     Views: 9972     Rating:

Buenos 1/8 buggy (Reverse)

Forum: Car setup
GB Javan C
Added: 10.05.2014 [23:20]
Posts: 7     Views: 8927     Rating:

My 1/8 nitro setup for Padova. Best lap 34.156

Forum: Car setup
ZA Eben C
Added: 26.12.2013 [11:53]
Posts: 13     Views: 8706     Rating:

1/8 Buggy Spec Average 34.502

Forum: Replay
GB Javan C
Added: 11.03.2015 [22:41]
Posts: 3     Views: 7568     Rating:

My take on a 4-channel setup USB adaptor/docking station

Forum: Hardware
GB Mike K.
Added: 25.01.2014 [21:36]
Posts: 7     Views: 7278     Rating:

Translate

Share on Facebook

Share on Twitter