Welcome to the 1:12 Spec. Freaks

Club for 1:12 lovers

Spec.-races on indoor & outdoor tracks

Club details

Club name:	1:12 Spec. Freaks
Created:	21.09.2013
Manager:	Thorsten Müller
Country:	Germany
Home track:	Orlando Indoor
Members:	202

Overview News Members Events Ranking Forum Tips & knowl.Photos Videos

Tips & knowledge item

"Dead Zone" It's the key added: 09.05.2014

Category: Recommendation Views: 8291 Rating:

A very helpful control option setting I have found crucial to straight line "Feel" Is the "Steering Dead Zone" . When starting out with VRC you might find it much easier to set up your corner entry by going into "Control Option's" then Click on "customize" The default setting for Steering dead zone is 5%...But for most people this setting is very re-active especially with 1/12th scale ...It has been my experience that 4% for touring car's and as much as 7% for 1/12th gives me a much less reactive initial steering allowing me to hold a more consistent line and therefore Lap time... Please rate this Tip if you find it has helped you..And "Enjoy your racing" :-)

Edited by author: 25.7.2014 1:08:28 GMT

Comments

Only active members can post comments

(Total posts: 3)

Andrea G VRC World Champion	21.01.2019 [20:43] In a real radio there is no dead zone in the sterring, so, i use it as low as possible: 0 dead zone in the radio and 2 in a joypad/controller. I prefer instead a bit of dead zone in throttle, just like i prefer it in a real rc car. Once find out what feel best, no need to change this setting anymore. Edited by author: 21.1.2019 20:51:14 GMT
Shawn Rusin	20.01.2019 [14:02] Great tip! Worked just taking it to "0" fore me. Running RX8 1/8 nitro buggy. Tried Fear Farm, Las Vegas and Silver Dollar 3 AMain. Thanks Edited by author: 20.1.2019 14:02:56 GMT
Luke A.	23.06.2014 [08:38] Awesome tip. Recommend all racers try these settings out.